Motorola DTR SERIES DTR550 - Manual (Page 56)

February 10, 2005 9980384R89-O
5-4 Cloning Mode: Cloning by Sending a Contact
8. Scroll to the contact to receive the new contact.
9. Press under Select to select the contact.
10. Press under Prgm. The screen is displayed showing the Add: and To: selections. If
these are correct press under Go to transmit the selection over the air. If the selections
are not correct press under Back to return to the selection menu.
11. The screen displays the message "Clone Sending XXXXXXX". X = the contact you are send-
ing to. If sending a contact to a PrivateGroup, the display shows each target radio individually.
If cloning was successful, both the source and targets radios indicated “Programming Successful”. If
over-the-cloning to a PrivateGroup fails, the radio displays the failed clone list. The user can attempt
cloning again to any members of this list.
Add:Joe Smith
Change
Send Contact
To:Security
Prgm
Press Go To
Go Back
Add:Joe Smith
To:Security
Over The Air