Philips Magnavox MVR650MG/17 - Manual (Page 26)

CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS
SLOW REC MEMORY
SPEED SEARCH MODE STILL/PAUSE
VCR/TV EJECT
MENU CLEAR
REW
PLAY
STOP
F.FWD
PROGRAM NUMBER 1
B ONCE
DAILY
WEEKLY
26 Timer Recording
Your VCR can record TV programs while you’re away.You can pro-
gram up to eight timer recordings. For each one, the VCR will turn
itself on, record, and turn itself off. Make sure:
● Channels are set.
● The clock is set.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR is in VCR position.The VCR/TV light will appear. If it
does not, press VCR/TV once.
1 Press MENU until MENU appears. Press PLAY or
STOP to select TIMER PROGRAMMING. Press
F.FWD. Available program numbers will flash.
PROGRAM NUMBER 1
DATE
– – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
1-3
1
TIMER PROGRAMMING
PROG. 12345678
DATE
START TIME
END TIME
CHANNEL
REC SPEED
• Only programs that air Monday-
Friday can be recorded on a
DAILY basis. If you select DAILY
at step 3, then enter a Saturday
or Sunday DATE at step 4, the
correct program will not record.
The VCR will alter the recording
date and record a different pro-
gram than you intended.
Helpful Hint
2 Press PLAY or STOP repeatedly to select a program
number. Press F.FWD. (If you select a program number
that already has a timer recording stored, information about
that program will appear. Press PLAY or STOP to select
another program number.)
3 Press PLAY or STOP repeatedly to select a ONCE,
DAILY, or WEEKLY recording.When the arrow is
beside your choice, press F.FWD.
● ONCE - The VCR will record a TV program on any day
you choose, up to 12 months away.
● DAILY - The VCR will record a TV program at the same
time on the same channel every day, Monday through Friday.
● WEEKLY - The VCR will record a TV program at the same
time on the same channel every week, for example, every
Monday.