Philips Magnavox MVR650MG/17 - Manual (Page 10)

10 Hookups with a Stereo TV
ANT AUDIO
VIDEO
IN
OUT
OUT IN
OUT
L
R
IN
Antenna or Cable TV signal
to ANT(enna) IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and AUDIO
(red and white) OUT Jacks
Audio and Video
IN Jacks on TV
● Audio and Video cables are not supplied.
1
2
3
• If your TV has only one AUDIO
IN jack, connect a single audio
cable to the white AUDIO OUT
jack on the VCR and to the white
AUDIO IN jack on the TV. See
your TV manual for details of
connecting a VCR to the TV.
Helpful Hint
1 Connect the antenna or Cable TV signal to the
ANT(enna) IN Jack on the back of the VCR.
2 Connect a video cable to the VCR’s yellow VIDEO
OUT Jack and to the TV’s VIDEO IN Jack.
3 MVR650MG/17
Connect a stereo audio cable to the VCR’s red and
white AUDIO OUT Jacks and to the TV’s AUDIO IN
Jacks. Match cable colors to jack colors.
MVR440MG/17, MVR450MG/17
Connect a “Y” splitter audio cable to the VCR’s
white AUDIO OUT Jack and to the TV’s AUDIO IN
Jacks.
4 Turn on your TV, making sure it is in Line Input or
Auxiliary mode.Your TV may refer to this as an Audio/Video
In channel, or A/V In, External In, Auxiliary In, etc. Such chan-
nels are usually located near channel zero (0). Or, your TV
remote may have a button or switch that selects different
Video or Auxiliary channels. See your TV manual for details.
ANT
AUDIO
VIDEO
IN
OUT OUT IN
Antenna or Cable TV signal
to ANT(enna) IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and
AUDIO (white) OUT Jacks
Audio and Video
IN Jacks on TV
1
2
3
MVR650MG/17
MVR440MG/17, MVR450MG/17