Motorola WU830G - Manual (Page 17)

INSTALLATION SECTION 2
WU830G 2-5
Installing Your USB Adapter
To install the software and hardware:
1 Insert the supplied CD-ROM into the CD-ROM drive. The
software automatically starts the Installation Wizard program.
2 If the software does not automatically start, from your desktop,
select Start > Run > the name of your CD ROM
directory:/setup.exe.
3 Follow the prompts to set up your USB adapter.
If Windows 98SE prompts you for the original Windows CD-ROM,
insert the CD-ROM, and direct Windows to its proper location (for
example, D:\WIN98).
4 Locate an empty USB port on your computer.
5 Connect one end of the USB 2.0 cable to the USB port on the
back of the WU830G and connect the other end of the
USB 2.0 cable to the USB port on your laptop or desktop
computer:
WU830G
Your computer may vary from illustration
6 Complete the installation instructions supplied on the CD-ROM.
Device Configuration Setup
After installing the USB adapter and software, you will need to
connect to a network. Refer to Section 3, Configuration for
information on how to create detailed connectivity profiles so you can
connect to a wireless network, set up security, and set up modes
of operation.