Freescale semiconductor, i, Freescale semiconductor, inc – Motorola M68EZ328ADS User Manual
Page 49
Monitor Initialization Code
D-48
M68EZ328ADS v2.0 USER’S MANUAL
MOTOROLA
* Seting for MC68681 on EZ-ADS
*
Supported baudrate: 19200
*
9600
****************************************
;#define DEV_IN
MC68681
;#define DEV_OUT
MC68681
;#define PNAME_IN
A
;#define PNAME_OUT A
;BASE_IN:
equ
$fffd0001
; base address of input device
;BASE_OUT:
equ
$fffd0001
; base address of output device
;BAUD_IN:
equ
19200
; baud rates (bits/sec)
;BAUD_OUT:
equ
19200
; baud rates (bits/sec)
;ACR_VAL:
equ
$80
; choose baud set 2 (bit#7=1)
;IRQ_MASK:
equ
$00
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
*****************************************************
* Seting for MC68681 on EZ-ADS with BaudRate=57600bps
*****************************************************
;#define DEV_IN
MC68681
;#define DEV_OUT
MC68681
;#define PNAME_IN
A
;#define PNAME_OUT A
;BASE_IN:
equ
$fffd0001
; base address of input device
;BASE_OUT:
equ
$fffd0001
; base address of output device
;BAUD_IN:
equ
0
;BAUD_OUT:
equ
0
;ACR_VAL:
equ
$60
;IRQ_MASK:
equ
$00
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
****************************************************************************
*
INTERRUPT BEHAVIOR OPTIONS
****************************************************************************
#define STOP_LEVEL
7
#define VECT_STOP
$47
; ABORT interrupt
; **************************************************
; If your board hardware requires you to clear the
; "read" interrupt, then you must include the necessary
; code inside the INT_RCLEAR macro below.
; **************************************************
INT_RCLEAR:
macro
endm
; **************************************************
;
"stop" interrupt
;
We will only stop the target if the ABORT switch is pressed. We
;
will not stop for HOST_NMI or EXT_NMI interrupts.
;
The Non-Maskable Interrupt status is in the NMI_STATUS register
;
which is in even-byte locations at NMI_STATUS. Bit #0 of the
; first byte at NMI_STATUS indicates that the ABORT switch was pressed.
; **************************************************
INT_STOP:
macro
Freescale Semiconductor, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc.
..
ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
ARCHIVED BY FREESCALE SEMICONDUCT
OR,
INC.
2005