Motorola V Series 120c - Manual (Page 90)

90
Programming Instructions
Follow this procedure if you need to program your phone’s
phone number or system ID.
Note: Programming is normally done by a trained technician at
the site of purchase. Users should not make changes other than
ones in the following procedure.
Before programming, ask your service provider for your:
• 10-digit MIN (Mobile Identification Number)
• 8- to 15-digit IMSI (International Mobile Service Identifier)
• 8- to 15-digit MDN (Mobile Directory Number)
• 5-digit AMPS SysID number
• 5-digit CDMA SysID number
Do This To
1 Press 7 4 6 6 3
# M M
(These keys spell P-H-O-N-E
+
# M M ).
open the user activation
menu
2 Press SELECT (
+
) select NAM1
3 Press the keypad keys for the
10-digit MIN open the MIN display and
enter the new MIN
4 Press OK (
+
) store the new MIN
5 Similarly, enter appropriate numbers for the IMSI, MDN,
AMPS SysID, and CDMA SysID
6 Press DONE (
-
) close the NAM1 list
7 Press BACK (
-
) close the user activation
menu
User.Guide.Tarpon.book Page 90 Thursday, April 26, 2001 2:23 PM