Monessen Hearth 6000DV - Manual (Page 10)

10 42D0200
C
A
2
A
1
C
A
2
B
A
1
It is best to build firebox framing AFTER the appliance is set in place. Refer to the dimensions for your fireplace on pages
10 through 12. The framing headers may rest on the top of the firebox standoffs.
The firebox may be installed directly on a combustible floor or raised on a platform of an appropriate height. Do not place
firebox on carpeting, vinyl, or other soft floor coverings. It may, however, be placed on a flat wood, plywood, particle board,
or other hard surfaces. Be sure firebox rests on a solid continuous floor or platform with appropriate framing for support. No
cold air should enter room from under the firebox.
Figure 4 - Top View of Framing for
Installing as a Peninsula
Figure 5 - Framing for Peninsula Units
2"x4"
2"x4"
(Minimum)
2"x4"
(Minimum)
Gas
Connection
FRAMING FIREPLACE
FRAMING PENINSULA FIREPLACE