Specifications, Digital cable receiver, A/v receiver and amplifier – Motorola DCP 501 User Manual
Page 125
DC P5 01 Us er Guide
S p e c i f i c a t i o n s
D i g i t a l C a b l e R e c e i v e r
Clear analog video
Yes
64 and 256-QAM demodulator
Yes
Agile OOB tuner
Yes
Return Path
Both RF and integrated Telco Return capabilities
Standard definition MPEG2
Yes
NTSC video decoder with adaptive digital comb filter Yes
Graphics
Enhanced Resolution Bitmapped Graphics (2/4/8 Bit)
A / V R e c e i v e r a n d A m p l i f i e r
RMS Output Power
2x100 Watts, 20 Hz to 20 kHz
5x100 Watts, 1 kHz
Dolby
Digital Decoder
6 channels
DTS
Decoder
6 channels
Dolby
Prologic II Processing
Yes
Audio effects processor
6 modes
Amplified speaker outputs
Yes
Headphone output
Yes
Analog volume control, all speakers
Yes
Balance control, right/left
Yes
Balance control, front/rear
Yes
Tone control, front left/right
Yes
SPDIF input with Auto Detect
Yes
BTSC decoder
Yes
AM/FM Tuning
Yes
Audio Frequency Response
20 Hz to 20 kHz, +/- 1 dB
Harmonic Distortion
< 0.1% THD, 2x100Watts
< 0.9% THD, 5x100Watts
Audio Signal-to-Noise Ratio
95 dB, A-weighted
Video Signal-to-Noise Ratio
> 57 dB (Digital), >49dB (Analog)
Video Frequency Response
±
1 dB from 100 kHz to 4.2 MHz