Motorola DCP 501 - Manual (Page 110)

1 0 0 O p e r a t i o n
DC P5 01 Us er Guide
4 Press SELECT or OK and the selected file is copied to the right-hand side of the screen as
shown in the example below.
5 Repeat steps 2 and 3 to add selections to your Programmed Playlist. You can have up to
1025 selections in your Programmed Playlist.
6 To listen to your selections, press PLAY PAUSE on the front panel, or the play button ( ►) on
your DCP501 remote control and the play icon ► is displayed.
Deleting Selections from an MP3 CD
To remove selections from your MP3 Programmed Playlist:
1 Press CURSOR up/down (
∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨) to select an MP3 file from your Programmed Playlist.
2 Press CLEAR on the remote control and the selected file is deleted from the Programmed
Playlist on the right-hand side of the screen.
3 Continue selecting the files you want to delete.
4 To listen to your revised Programmed Playlist, press PLAY PAUSE on the front panel, or the
play button ( ►) on your DCP501 remote control and the play icon ► is displayed.
To remove all files from a MP3 Programmed Playlist, press CURSOR up/down (
∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨) to select
A l l C l e a r . Then, press SELECT or OK and all files are removed from the Programmed Playlist.
Selecting Specific Folder and Files for Playback
To playback a specific file on folder on your MP3 CD:
1 Press CURSOR up/down (
∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨) to select a folder and then press
SELECT or OK . The files in the
selected folder are listed under the folder.
2 Press CURSOR up/down (
∧ ∧ ∧ ∧ ∨ ∨ ∨ ∨) to select a file and then press
SELECT or OK . Playback starts
from the file or folder you selected. Files in the next folder are played back when there are
no files are in the selected folder.