MIDLAND BR777 - Manual (Page 30)

Setting the
Call Alert/
Vibrate Alert
Setting the
VOX
Cloning the
Radio setting
- Press the button until “CA”
appears.
- Press the
S or T button to select
the Call Alert tone between 0~4.
- Selecting “0” will disable the Call
Alert function.
- Selecting “1~3” will set the Call Alert
tones.
- Selecting “4” will disable the Call
Alert and enable the Vibrate Alert.
The Vibrate Alert icon will appear
on the display.
MODE
- Press the button until “VOX”
appears.
- Press the
S or T button to set the
VOX level.
MODE
Start this process without the
Cloning Cable attached to the radios.
- Set both radios to Program mode.
- Press the button until “CL”
appears on both radios.
- Press the
T button on Target radio.
RX will appear.
- Press the
S button on Source radio.
TX will appear.
- Connect the Cloning Cable.
- Press again the
T button on Target
radio.
- Press again the
S button on Source
radio.
- “P” will appear on the display when
Cloning is finished.
- Remove the Cloning Cable and turn
off the radios.
MODE
BLUE STAR by MIDLAND
BR777 PROGRAMMING QUICK REFERENCE GUIDE