MIDLAND BR777 - Manual (Page 15)

Page 13 www.bluestarcomm.net
BR777 PROGRAMMING QUICK REFERENCE CHART
PROGRAMMING YOUR RADIO SETTINGS
Programming mode allows you to change the following settings on
your radio:
l Channel (1~4)
l Frequency (1~56)
l Privacy Code (0~121)
l Scan List (y/n)
l Call Alert/Vibrate Alert (0~4; 4 is for Vibrate Alert)
l VOX (0/1/2/3 ; 0 is off)
l Cloning
ENTERING THE PROGRAMMING MODE
To enter the PROGRAM mode, start with the radio powered off and
press and hold the SCAN button and PTT button simultaneously while
you power the radio on; done by pressing the MODE button for 3
seconds. The radio will beep and display all the LCD segments for a
few seconds. The Program icon (shown by PROG) will appear, the
channel number flashes, and the Frequency icon (shown by
FREQ) and Privacy Code icon (shown by CODE) will be displayed
alternately.
To exit PROGRAM mode, press the MODE button for 3 seconds then
the unit will power off.
Model BR777
MODE Channel
1~4
Frequency Call Alert
0 ~ 4
Privacy
0~121
VOX
0/1/2/3
Clone Scan List
y/n
1~56
1~3 is Call Alert
4 is Vibrate Alert