English, Terminal panel – MITSUBISHI ELECTRIC LDT46IV User Manual
Page 8
English
English-7
AC IN connector
Connects with the supplied power cord.
RGB 1 IN (HDMI 1)
To input digital RGB signals from a computer.
* This connector does not support analog input.
AUDIO is supported via HDMI.
RGB 2 IN (HDMI 2)
To input digital RGB signals from a computer.
* This connector does not support analog input.
AUDIO is supported via HDMI.
RGB 3 IN (mini D-Sub 15 pin)
To input a analog RGB signals from a computer or other RGB
equipment.
RGB 4 IN [R, G, B, H, V] (BNC)
To input the analog RGB signals from a computer or other
RGB equipment.
RGB OUT (mini D-Sub 15 pin)
To output the signal from RGB 3 IN or 4 IN.
DVD/HD IN [Y, Pb/Cb, Pr/Cr] (BNC)
Connecting equipment such as a DVD player, HDTV device,
or Laser disc player.
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a com-
puter, VCR or DVD player.
AUDIO OUT
To output the audio signal from the AUDIO IN 1,2 and 3 jack.
EXTERNAL CONTROL (mini D-Sub 9 pin)
Connect the IN connector with the RS-232C OUT connector
of the computer or a multi-connected LDT461V monitor.
Connect the OUT connector with the RS-232C IN connector
of LDT461V monitor.
VIDEO IN/OUT
VIDEO IN connector (BNC and RCA): To input a composite
video signal. BNC and RCA are not available at the same
time. (Use only one input).
VIDEO OUT connector (BNC): To output the composite
video signal from VIDEO IN connector.
S-VIDEO IN connector (MINI DIN 4 pin): To input the
S-video (Y/C separate signal).
EXTERNAL SPEAKER TERMINAL
To output the audio signal for external speakers from AUDIO 1,
2, 3 jack or HDMI.
Terminal Panel
(IN)
(IN)
(OUT)
(OUT)