English, Adjust the sound, Adjust the screen (see pages 23-31) – MITSUBISHI ELECTRIC LDT46IV User Manual
Page 12: Adjust the image (see page 23-31), Recommended adjustment, Installing and removing stands, Connecting hdmi cable
English
English-11
7. Adjust the sound
Make adjustments when adjustment of the volume is required.
8. Adjust the screen (See pages 23-31)
Make adjustments when adjustment of the screen display
position or distortion is required.
9. Adjust the image (See page 23-31)
Make adjustments when adjustment such as the brightness
or contrast is required.
10. Recommended Adjustment
To reduce the risk of “image persistence”, please adjust
the following items based on the application being used.
“POWER SAVE” (See page 26), “SCREEN SAVER” (See
page 26), “SIDE BORDER COLOR”(See page 26), “DATE
AND TIME” (See page 29), “SCHEDULE”(See page 29).
11. Installing and removing stands
How to install stands
1. Please turn monitor off.
2. After inserting stand in guide block, fasten Thumbscrews
on both sides of the monitor.
NOTE:
Install the stands so that their longer portions come to the
front.
How to remove the stands
1. Spread the protective sheet on the fl at surface, such as a
desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
safe place for reuse.
Screws
Stands
Longer portion
comes to the
front.
12. To prevent the main power switch
from being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE:
With the main power switch cover in place, the main power
switch can not be turned off. Remove main power switch
cover in order to switch off the display.
13. Connecting HDMI cable
Screw
Main switch cover
Clamper
Cable Holder