MITSUBISHI ELECTRIC WS-65909 - Manual (Page 80)

80 80
A
p
p
e
n
d
ix
F
:
C
a
b
in
e
t
S
e
p
a
ra
ti
o
n
f
o
r
M
o
d
e
ls
W
S
-6
5
9
0
9
&
W
S
-7
3
9
0
9
Appendix F: Cabinet Separation
Cabinet Separation for Models WS-65909 and WS-73909
For Mitsubishi Dealers and
Service Personnel Only
The Mitsubishi TV models WS-65909 and
WS-73909 cabinet have been assembled in two
pieces. These pieces may be separated to
allow for easier delivery and set up. The instruc-
tions below show how to safely separate and
reattach the cabinet. This TV weighs over 320
lbs and has many sensative components. This
dismantling procedure should be done by autho-
rized Mitsubishi Dealers or Service Personnel
only.
The following steps should be performed by two people:
1
Remove the decorative Plastic Covers (2) on
each side of the cabinet and then remove the
exposed Screws (2) on each side.
2
Carefully lift the Cabinet-Top straight up until
the Brackets are clear from the Cabinet-Bottom.
3
Carefully place the Cabinet-Top on the oor .
4
Once you have moved and positioned the
Cabinet-Bottom to its desired location, reverse
the procedure and mount the Cabinet-Top on
the Cabinet-Bottom. Be sure you align the
Brackets properly. Keep nger s cl ear of all
joints! Replace the screws and the decorative
Plastic Covers.
1
2
3
4