MITSUBISHI ELECTRIC WS-65909 - Manual (Page 31)

31 31
Part II: Installation
T
h
e
N
e
tC
o
m
m
a
n
d
™
S
e
tu
p
:
S
e
tu
p
S
c
re
e
n
s
The NetCommand™ Setup: Setup Screens
Review Screen
Figure 1
Once you have ni shed t he set up scr eens
and selected the manufacturer and model
for each device, you will see the Review
Screen. It is important to keep in mind that
you are reviewing the settings that are about
to be made, so you can still navigate back
through the NetCommand™ Setup screens
to make changes. If you select Next>, all
selections made are nal ized.
While viewing the Review Screen, adding or
removing checks from the checkboxes on
the left will turn devices (or inputs) on or off.
Finish Screen
Figure 2
The Finish Screen is displayed and all selec-
tions have been nal ized. Se l ect Fi ni sh t o
end Setup. If you wish to change any of
the precon gur ed i nput s or name s f or the
devices, select the Edit button. You may still
need to memorize the available channels for
Ant-A, Ant-B and Ant-DTV by going to the
Main menu and selecting antenna.
Figure 1. Review menu.
Figure 2. Finish menu.