Marathon Computer UNIPRO V3.5 User Manual

Page 93

MMI Product Documentation

Unipro 3.5 Process Control 1 Aug. 1997

To Exit the Editor Without Saving the Program

Press [Setpt ]at any time, the edited program is lost (the

copy in non-volatile memory is unchanged)

To Exit the Editor Saving the Program

Edit through step 19 as required, inserting NOP's

wherever no operation is to be executed

Press [ENTER]

Select the program number in the SET display using the

[arrow keys] until the desired program number is being displayed

(SAVE / 0000)

Press [ENTER], the program stored in that location

previously is now lost (SAVE / Done)

CHANGING PARAMETERS

All of the UNIPRO parameters, program numbers,

OPCODES, and data values can be altered using the following

procedure:

Press [Pr. Fact. / Ctrl. Param.]. The word

MENU will appear in the PROCESS window.

The Parameter group will appear in the SET

window. Press [ENTER]. The symbol for the

parameter is displayed in the PROCESS window

while the current alterable data is shown in the

SET window. The flashing character is the one

that can be altered.

Use the [LEFT ARROW] or [RIGHT ARROW]

keys to select the character to be altered.

Once the character to be changed is flashing, use

the [UP ARROW] or [DOWN ARROW] keys to

select the desired number or symbol.