Marathon Computer UNIPRO V3.5 - Manual (Page 89)

MMI Product Documentation
Unipro 3.5 Process Control 1 Aug. 1997
PROGRAM OPERATIONS
Running a Program
1. Press [PROG/AUTO/MAN]
until the instrument's Prog LED
lights.
2. The Program Number is
displayed in the SET
display, select the program
to be run using the arrow
keys.
3. OPTIONAL: If beginning at a step other than 1
Repeatedly press the [SHIFT] key to select the
step upon which the program should start. The
step number will appear in the PROCESS
display.
4. Press [ENTER] to run the program.
5. If the Program Number in the SET display
begins to flash, there is something wrong with
the program (i.e. memory disruption, wrong
command, etc.). Press the [PROG/AUTO/MAN]
key to escape, or select a new program using the
arrow keys. Troubleshoot the program and then
restart this procedure.
Stopping a Program
1. Press [PROG/AUTO/MAN] UNTIL either the
Auto or Man LEDs begin to flash, indicating a
program is in HOLD. Press [ENTER] to cancel
the program (flashing will stop).
OR