Marathon Computer UNIPRO V3.5 - Manual (Page 152)

Programming
Unipro3.5
Rev. 11.00
December 30, 1995
o Sets the maximum
time to wait for a condition to be
met.*
P
No Effect*
q No Effect*
r ILLEGAL! An r
OPCODE must always be followed
by an H OPCODE.
S
No Effect*
T No Effect*
t Sets maximum time
to wait for a condition to be met.**
U
Sets maximum time
to wait for a condition to be met.**
Y
Sets the maximum
time allowed to wait for a
condition to be met.*
= No Effect*
- No Effect*
* When a LIMIT
statement follows this
OPCODE it is interpreted
as a NOP.
** An alarm 93 is displayed and/or
sounded only if the limit statement is
not followed by a branch. If the
condition is not met by the time listed in
the data statement, the unit will display
and/or sound an Alarm #93. If the
alarm need only be acknowledged and
operation is to continue, press Enter
once to silence the alarm and then press
Setpt to skip the LIMIT OPCODE and
resume operation.