MSI MS-7242 - Manual (Page 97)

C-10
M S-7242 M ainboard
u To use three connection mode: One from TV ang two from the graphics
card.)
If you use the three connections mode (one from the TV and two from the graphics
card), it is required to follow the step below to recognize the TV that connected to
the mainboard:
1. Install the TV-out bracket to the mainboard.
2. Connect the TV to the TV-out bracket.
3. Power on the computer. (Be sure you had install the “ATi System Drivers”
already, if not please install it.)
4. Click the “ATI Catalyst Control Center” icon on the desktop.
5. Click the “Display Options” from the left side on the CATAYST TM Control Center.
6. Check the “Force TV detection” in the Display Detection Option part. Then
click “Apply” and “OK”.
The system will detect the TV after the configuration.