MSI MS-7242 - Manual (Page 93)

C-6
M S-7242 M ainboard
Enabling SURROUNDVIEW TM
To enable SURROUNDVIEW ™, you must first alter your computer’s BIOS settings.
1. Restart your system, and enter CMOS setup. CMOS is part of your system ’s
BIOS (Basic Input/Output System). W hen restarting, press DEL key to enter
Setup. The CMOS Setup screen appears.
2. Use the arrow keys to navigate to Advanced Chipset Features, and then
press Enter. The Advanced Chipset Features screen appears.
3. Use the arrow keys to navigate to VGA Share M emory Size. The default
value [Recommended] refers to a minimum size of 64MB and up. Users
may leave the value to [Recommended] or set it to 64MB (or higher).
4. Use the arrow keys to navigate to SurroundView and set it to Enabled.
5. Press F10 to Save your changes. When the Save to CMOS and Exit prompt
appears, press Y.
Important
After setting the BIOS and enter the O.S., the system will pop up the “Found
New Hardware Wizard ” window to ask you to provide some files to complete
the surroundview installation. Please insert the “MSI system driver” CD into
the CD-ROM which provides the appropriate files for it.