Muratec MFX-1350 - Manual (Page 83)

4-18 s
endInG faxes
Polling transmission
Polling transmission allows someone to retrieve a document stored in your machine’s
memory. The stored document will be sent when the other party calls you.
Storing a document for polling transmission
1
Switch to the Fax mode by pressing <
copy 4 fax 4 scan
>.
2
If your machine is set for Tel Ready reception, change it to a reception mode other
than Tel Ready. (Refer to “Selecting the reception mode” on page 5-2.)
3
Place the document on the ADF or document glass, and adjust the fax resolution and
contrast.
4
Press
Your machine will scan the document into memory and return to the standby mode.
NOTE: • The document glass is available only for the MFX-1350/MFX-1330.
• Once the remote fax machine polls the document you stored, your machine will
automatically erase the document from memory.
Printing a stored polling document
To print a polling document without erasing it, press
.
Erasing a stored polling document:
To erase a polling document from your machine’s memory:
1
Press
2
Press to erase the document.
If you want to quit the operation without erasing, press .