Muratec MFX-1350 - Manual (Page 81)

4-16 s
endInG faxes
Erasing a document stored in a batch box:
1
Press
2
Use the numeric key to enter the box number, then press .
3
Use the numeric key to enter the document’s file number.
4
Press to delete the document.
If you want to quit the operation without erasing, press .
Erasing an empty batch box
Batch boxes must be empty to be erased. If a box has documents stored in it, you must
delete those before proceeding. (See above “Erasing a document stored in a batch box”.)
To erase an empty batch box:
1
Press
Select Batch Box
1:9-5551023
2
Use the numeric key to enter the batch box number.
3
Press . The following two displays will appear:
1:Erase Batch Box
Yes  Enter
1:Erase Batch Box
No  Cancel
4
Press to erase the batch box.
To cancel, press .
5
To erase another batch box, repeat procedures from step 2.
To exit, press .
NOTE: If you select a batch box which is not empty, the machine beeps and briefly shows:
Select Batch Box
Document Stored
Erase any documents stored in the batch box, then repeat this procedure from the
beginning to erase the box.