Matrox Electronic Systems G450 MMS - Manual (Page 9)

Matrox G450 MMS – User Guide 9
Windows 2000/XP – If you have a Plug-and-Play (DDC) monitor, Windows should
automatically use correct settings for your monitor. To make sure the correct monitor is
selected in Windows:
1 Right-click your Windows desktop background, then click Properties " Settings "
Advanced " Monitor . If you’re using a multi-display desktop ( see “Multi-display setup”,
page 10 ), select a display before clicking Advanced .
2 If the monitor name listed doesn’t match your monitor, click Properties " Driver "
Update driver . Follow the on-screen instructions.
3 If you’re using a multi-display desktop ( see “Multi-display setup”, page 10 ), repeat steps
1 – 2 for each display in your Windows desktop.
For more information on Windows monitor settings, see Windows documentation.
If you want to customize your Windows monitor settings:
1 Access the PowerDesk Monitor Settings property sheet ( see “Accessing PowerDesk
property sheets”, page 8 ).
2 Depending on what you want to do, click one of the buttons in the Monitor settings
selection method box, then follow the on-screen instructions.
Windows NT 4.0 –
1 Access the PowerDesk Monitor property sheet ( see “Accessing PowerDesk property
sheets”, page 8 ).
2 If you have a Plug-and-Play monitor:
Make sure the
Plug-and-Play (DDC) monitor button is
selected. If so, the Matrox display driver automatically uses correct settings for your
monitor. If not, click this button, then click
Apply .
If you don’t have a Plug-and-Play monitor:
See if the
Default monitor (60 Hz) button is selected. If
so, use the Matrox monitor selection method. For more information on Matrox monitor
selection, see Matrox PowerDesk online documentation.
3 If you’re using a multi-display desktop ( see “Multi-display setup”, page 10 ), repeat steps
1 – 2 for each display in your Windows desktop.