Moxa Technologies DE-211 - Manual (Page 25)

4 4
4
Ethernet Installation
We discuss the following topics:
¾
Connecting to the Ethernet Port
• Connecting to a Hub or Switch
• Connecting to a PC
Connecting to the Ethernet Port
Connecting to a Hub or Switch
For most applications, you will simply plug one end of your Ethernet cable into
NPort Express’s 10BaseT port, and the other end into a Hub or Switch that is
connected to your network. In this case, you should use a standard straight-through
Ethernet cable, which is readily available from many commercial vendors. If
necessary however, you can make your own cable by referring to the following
cable wiring diagram.