Specifications – Mark Levinson 53 User Manual
Page 34
30
Mark Levinson
Specifications
All specifications are subject to change without notice.
Input & Output Connectors
•
one balanced XLR input
•
one unbalanced RCA input
•
two pairs of “Hurricane” loudspeaker output binding posts with
banana-plug sockets (banana-plug socket not available for some
models)
Control Connectors
•
two Link2 ports (one input and one output)
•
one Ethernet port
•
one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
•
one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
•
3-pin IEC standard power connector
Rated Output Power
500W @ 8 Ω, 1000W @ 4 Ω
Power ratings are measured as rms power from 20Hz to 20kHz with
no more than 0.1% THD.
Frequency Response
within +0.1dB from 10Hz to 20kHz
Signal to Noise Ratio
–85dB, reference level: 2.83 Vrms (1W @ 8 Ω)
Input Impedance
100 kΩ (balanced); 50 kΩ (unbalanced)
Voltage Gain
26.8dB
Input Sensitivity
2.89V for maximum rated output power
Power Requirements
100V∼, 120V∼, 230V∼, 640W, factory set for destination country
Dimensions*
•
Height: 20.87 in (530mm)
•
Width: 8.42 in (214mm)
•
Depth: 20.4 in (518mm)
*See Dimensions diagram on the next page.
Weight
•
Net weight: 135 lbs (61.24kg)
•
Shipping weight: 165 lbs (74.84kg)
Operating Environment
•
Operating temperature: 0
o
to 35
o
C (32
o
to 95
o
F)
•
Storage temperature: –30
o
to 75
o
C (–22
o
to 167
o
F)
•
Relative humidity: 95% maximum without condensation