MITSUBISHI ELECTRIC PD-4265 - Manual (Page 10)

1
50 mm (2")
50
mm
(2")
Wall
Wall
50 mm (2")
PD-4265
105mm (4.1")
PD-5065
126mm (5.0")
Installation
CAUTION
This device needs to be attached to the supplied stand and speakers.
How to use the safety metal fittings
and the screws for safety metal fittings
These are fittings for fastening the unit to a wall to prevent
tipping due to external shock when using the stand
(optional). Fasten the safety fittings to the holes in the
back of the monitor using the safety fitting mount screws.
* Safety metal fittings will differ according to the model.
Screw hole
Wall
Table Top
Safety metal fittings
Screw for Safty metal
fittings
Metal chain
(Not supplied)
Screw or Hook etc.
(Not supplied)
Minimum ventilation requirements
To allow heat to disperse, leave space between surrounding
objects as shown on the diagram below when installing.
General Instructions
When carrying, use the handles
attached to the upper back of the
display. (PD-5065)
The speakers and stand are not consumer removable and should only be removed by a qualified dealer or installer.
The distance between the surrounding objects and the back
of the display should be greater than 4.1" for PD-4265
and greater than 5" for PD-5065. The base can not touch
surrounding object.