Motorola XPR 4580 - Manual (Page 71)

Advanced Features
English
59
3 P or Q to Radio Settings and press N to select.
4 P or Q to Site Roaming and press N to select.
5 P or Q to Active Search and press N to select.
6 A tone sounds and the display shows Finding Site.
The green LED blinks.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
connect to it, a tone sounds and the LED turns off. The
display shows Channel Busy.
8 The radio returns to the Home screen.
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.
2 P or Q to the required subscriber alias or ID and press
N to select.
3 The display shows Radio Disable: or ID> and the green LED lights up.
4 Wait for acknowledgment.
5 If successful, a tone sounds and the display shows Radio
Disable Successful.
OR
If not successful, a tone sounds and the display shows
Radio Disable Failed.