Monarch Instrument Paxar 9450 - Manual (Page 34)

Cleaning the Printhead ––––––––––––––––––––––––––––––––––––––
Clean the printhead daily when using the printer in excessively
dirty, hot, or humid environments. Also clean it after every five
rolls of supplies, or when you see voids in the print as shown.
To clean the printhead, use the cleaning card provided.
1. Remove the supplies as shown in Chapter 2.
c
Do Not back labels through the printhead or a jam may occur.
2. Feed the cleaning card through the supply guide and out
the supply chute to remove buildup. Repeat as needed.
3. Let the printer dry briefly. Then, reload your supplies.
c
Do Not use sharp objects to clean the printhead. This may
damage the printer and require a service charge.
Voids Correct Print
Cleaning
Card
Supply
Guide
9450 Operator’s Handbook
5-4