Monarch Instrument Paxar 9450 - Manual (Page 32)

2. If your printer has a removable supply guide, grab the
printer firmly with one hand. With the other hand, slide
out the supply guide as shown.
n
Do Not pull the supply guide completely out of the printer.
3. Use your fingers (no sharp objects) to remove any jammed
labels from the supply guide and supply chute.
4. Slide the supply guide back into the printer.
5. Use the cleaning card to clean the printhead and supply
chute. See "Cleaning the Printhead" later in this chapter
for more information.
c
Do Not use anything other than the cleaning card to clean the
supply path.
6. Reload the supplies and turn the printer on.
7. Press [Feed] to recalibrate the supply.
Supply
Guide
Jammed Label
in Supply Chute
9450 Operator’s Handbook
5-2