Mercedes-Benz SL-Class - Manual (Page 433)

431
Technical data
Fuels, coolants, lubricants, etc.
̄ Fuels, coolants, lubricants, etc.
Capacities Vehicle components and their respective
lubricants must match. Therefore use only
products tested and approved by
Mercedes Benz. Please refer to the Factory Approved Ser-
vice Products pamphlet, or inquire at your
Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants, etc.
Engine with oil filter SL 500
SL 600
SL 55 AMG
SL 65 AMG 7.9 US qt (7.5 l)
8.5 US qt (8.0 l)
9.0 US qt (8.5 l)
8.5 US qt (8.0 l) Approved engine oils
Automatic transmission SL 500
SL 600
SL 55 AMG
SL 65 AMG 10.3 US qt (9.7 l)
8.0 US qt (7.5 l)
9.1 US qt (8.6 l)
8.0 US qt (7.5 l) MB Automatic Transmission Fluid
Rear axle SL 500
SL 600
SL 55 AMG
SL 65 AMG 1.5 US qt (1.4 l)
1.3 US qt (1.2 l)
1.5 US qt (1.4 l)
1.3 US qt (1.2 l) Hypoid gear oil SAE 85 W 90
Hypoid gear oil SAE 85 W 90
Hypoid gear oil SAE 85 W 90
Hypoid gear oil SAE 75 W 140
Hydraulic system for active body control (ABC) approx. 4.3 US qt (4.0 l) MB Hydraulic Fluid
Power steering approx. 1.1 US qt (1.0 l) MB Power Steering Fluid (Pentosin
CHF 11S)
Front wheel hubs approx. 3.0 oz (85 g) each High temperature roller bearing grease
Brake system 1.1 US qt (1.05 l) MB Brake Fluid (DOT 4+)