Mercedes-Benz SL-Class - Manual (Page 275)

273
Operation
Engine compartment
One of the following messages will
subsequently appear in the right multi-
function display:
ț Engine oil level
OK
ț Add 1.0 qt.
to reach max.
oil level
(Canada: 1.0 l )
ț Add 1.5 qts.
to reach max.
oil level
(Canada: 1.5 l )
ț Add 2.0 qts.
to reach max.
oil level
(Canada: 2.0 l )
̈ If necessary, add engine oil.
For adding engine oil see ( ୴ page 274).
For more information on engine oil, see the
“Technical data” section (
୴ page 431) and
( ୴ page 433).
Other display messages
If the SmartKey or the KEYLESS-GO*
start/stop button is not in position 2, the
following message will appear:
Turn ignition on to
measure engine
oil level
̈ Switch on the ignition ( ୴ page 36).
If you see the message:
Observe
waiting time
̈ If the engine is at operating tempera-
ture, wait five minutes before repeating
the check procedure.
̈ If the engine is not at operating temper-
ature yet, wait 30 minutes before re-
peating the check procedure.
If you see the message:
Engine oil level
Not when
engine on
̈ Turn off the engine.
̈ If the engine is at operating tempera-
ture, wait five minutes before checking
oil.
̈ If the engine is at operating tempera-
ture yet, you must wait 30 minutes be-
fore checking oil. i
If you want to interrupt the checking
procedure, press the
k or j
button on the multifunction steering
wheel.