Mercedes-Benz SL-Class User Manual
Page 398

396
Practical hints
Flat tire
Removing the wheel
1 Alignment bolt
̈
Unscrew upper-most wheel bolt and re-
move.
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
̈
Remove the remaining bolts.
̈
Remove the wheel.
Mounting the new wheel
̈
Clean contact surfaces of wheel and
wheel hub.
̈
Guide the spare wheel onto the align-
ment bolt and push it on.
̈
Insert wheel bolts and tighten them
slightly.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Warning!
G
Inflate spare wheel tire only after the wheel
is properly mounted.
Inflate the spare wheel tire using the electric
pump (
୴
page 397)
before
lowering the ve-
hicle.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident. Be
sure to use the correct wheel bolts.