Mercedes-Benz SL-Class User Manual
Page 401
399
Practical hints
Flat tire
̈
Detach the electric air pump.
̈
Stow the electrical plug and the air
hose behind the flap and place the air
pump back in the trunk.
Lowering the vehicle
̈
Lower vehicle by turning crank coun-
terclockwise until the full weight of the
vehicle is resting on the ground.
̈
Pull the jack out of the jack support
tube.
1 - 5 Wheel bolts
̈
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1 to 5), until all bolts are tight.
Observe a tightening torque of 96 lb-ft
(130 Nm).
̈
Before storing the jack in the trunk,
crank back to storage position and fold
in the arm.
i
The flat tire may be transported in the
trunk when the retractable hardtop is
raised. Use the protective sheet provid-
ed with the spare wheel. Do not acti-
vate the tire inflation pressure monitor
until the deflated tire has been re-
moved from the vehicle.
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
96 lb-ft (130 Nm).
Warning
G
When turning the wheel wrench to tighten
the wheel bolts, make sure you position
hands on the wrench in such a way that you
avoid injury to yourself, such as scraping
your hands against the wheel. Make sure
turning the wheel wrench will not scratch or
damage the wheel rim.