Mark Levinson 500H - Manual (Page 29)

25
Nº500H Series Power Amplifier
Nº535H Specifications
All specifications are subject to change without notice.
Input & Output Connectors • five balanced XLR inputs per channel
• five unbalanced RCA inputs per channel
• five pairs loudspeaker outputs with banana-plug sockets
per channel (banana-plug socket not available on the
230 VAC models)
Control Connectors • one Ethernet 10Base-T port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector
Rated Output Power 20Hz to 20kHz at <0.5% THD, 200W per channel @ 8 Ω, full
output from 1.84Vrms
Frequency Response within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Voltage Gain 26.8dB
Input Sensitivity 2.83Vrms output at 130mVrms input
Power Requirements 100V~, 120V~, 230V~, 1000W, factory set for destination country
Dimensions* • Height (with feet): 7.65" (19.4cm)
• Height (without feet): 6.97" (17.7cm)
• Width: 17.75" (45.1cm)
• Depth: 19.83" (50.4cm)
*See dimensions diagram on the next page.
Weight • Net weight: 98.5 lbs (44.7kg)
• Shipping weight: 108.5 lbs (49.2kg)
Operating Environment • Operating temperature: 0º to 35ºC (32º to 95ºF)
• Storage temperature: –30º to 75ºC (–22º to 167ºF)
• Relative humidity: 95% maximum without condensation