Mark Levinson 500H - Manual (Page 28)

Mark Levinson
24
Nº531H, 532H, 533H
Specifications
All specifications are subject to change without notice.
Input & Output Connectors • one balanced XLR input per channel
• one unbalanced RCA input per channel
• one pair “Hurricane” loudspeaker outputs with banana-plug
sockets per channel (banana-plug socket not available on the
230 VAC models)
Control Connectors • one Ethernet 10Base-T port
• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
• 3-pin IEC standard power connector
Rated Output Power 20Hz to 20kHz at <0.5% THD, 300W per channel @ 8 Ω, full
output from 2.25Vrms
Frequency Response within 0.5dB from 10Hz to 20kHz
Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms
Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)
Voltage Gain 26.8dB
Input Sensitivity 2.83Vrms output at 130mVrms input
Power Requirements 100V~, 120V~, 230V~, factory set for destination country
Nº531H: 300W; Nº532H: 600W; Nº533H: 900W
Dimensions* • Height (with feet): 7.65" (19.4cm)
• Height (without feet): 6.97" (17.7cm)
• Width: 17.75" (45.1cm)
• Depth: 19.83" (50.4cm)
*See dimensions diagram on the next page.
Weight • Net weight: Nº531H: 52.5 lbs (23.8kg)
Nº532H: 74.0 lbs (33.6kg)
Nº533H: 90.0 lbs (40.8kg)
• Shipping weight: Nº531H: 62.5 lbs (28.4kg)
Nº532H: 84.0 lbs (38.1kg)
Nº533H: 100.0 lbs (45.4kg)
Operating Environment • Operating temperature: 0º to 35ºC (32º to 95ºF)
• Storage temperature: –30º to 75ºC (–22º to 167ºF)
• Relative humidity: 95% maximum without condensation