Motorola 9501 - Manual (Page 31)

Satellite Features 27
4. When complete, remove the pager from the
holster to view the display.
Note: If your signal strength indicator shows you
are out-of-range (antenna with no strength
bars), or weak (antenna with 1 or 2 strength
bars), move to an outer part of the building
or room with a window, where you may
obtain better reception results.
Satellite Strength Indicator (Average)
A satellite signal strength indicator is displayed on
the settings screen. This will give you an accurate
indication of received signal strength when you have
been in one location for more than 15 minutes with
the pager correctly oriented (in holster with display
side facing in). This measurement is an average
compiled over 15 minutes and is updated
approximately every three minutes.
If your signal strength indicator shows you are
out-of-range (no strength bars), or weak (1 or 2
strength bars), move to an outer part of the building
or room with a window, where you may obtain better
reception results. Use the “instant” satellite strength
indicator feature to verify improved performance.
In Range Out of Range
In Range Out of Range
In Range Check
6C
32142
In Range Check
6
Return
3 2 & 4 5 . ,
1
6C O
Return
3 2 & 4 5 . ,
1
6 O
CNIRIDBook Page 27 Friday, September 4, 1998 9:31