Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 99)

MetroSelect ™
A parity bit is an extra data bit used to help catch data transmission errors.
The scanner’s parity must match the host’s parity.
Parity Features
Select Space Parity to set the
parity bit always 0.
Select Even Parity to set the parity bit to
either a 1 or 0 to ensure an even num-
ber of bits are 1’s . Select Mark Parity to set the parity bit
always 1.
Select Odd Parity to set the
parity bit to either a 1 or a 0 to
ensure an odd number of bits are
1’s.
No Parity
*Space Parity
Even Parity Mark Parity
Odd Parity
316045
G-2
316005 316015
316025 316035