Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 138)

MetroSelect ™
M-1
User Configurable Prefixes, Symbol Length and other features that use these Code Bytes for configura-
tion, require that the scanner be in Configuration Mode. Scan the Enter/Exit Configuration Mode bar
code before starting the configuration cycle. Single Code Configuration Mode does not work for these
multi-code sequences.
Code Byte Usage
NOTE!
User configurable prefix/suffix characters (section E) can be saved into the scanner by scanning the 3
digit decimal equivalent of the ASCII character into the appropriate character location with the code
byte bar codes.
Example #1
Add an Asterisk (*) as a Prefix
1. Enter/Exit (3 beeps)
2. Configurable Prefix #1 (1 beep)
3. Code Byte #0 (1 beep)
4. Code Byte #4 (2 beeps)
5. Code Byte #2 (3 beeps)
6. Enter/Exit (3 beeps)