Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 104)

MetroSelect ™
G-7
Invert CTS Polarity (RSV2)
+12v = Inactive, do not send
-12v = Active, OK to send
*Standard CTS Polarity
-12v = Inactive, do not send
+12v = Active, OK to send
*Activate RTS, Wait for CTS
Wait for CTS after activating RT S .
Test CTS Not Present
Before RTS (RSV4)
Do not activate RTS if CTS is already
present.
*Do Not Test for CTS Present
Before RTS
Activate RTS without testing if CTS is
a l ready active.
Activate RTS,
Do Not wait for CTS (RSV3)
Activate RTS for transmission but, do
not wait for CTS to send.
124511 124501
124512 124502
124513 124503