Metrologic Instruments Metrologic Scanner MLPN 2407 - Manual (Page 70)

MetroSelect ™
Use Configurable Code ID Bytes
as Suffixes
User configured, code specific ID bytes
a re transmitted after the data. I f
using suffixes, user configure d
p refixes can not be used.
Configurable
UPC-A ID
Configurable
UPC-E ID
While using the MultiCode Method, scan
this bar code followed by the 3 code byte
bar codes in Section M that re p resent a
unique ID character to be associated with
this bar code type. Please refer to
MultiCode Method on page iii.
*Use Configurable Code ID Bytes
as Prefixes
User configured, code specific ID bytes
a re transmitted before the data. I f
using prefixes, user configure d
s u ffixes can not be used.
User Configurable ID Characters, Code Specific
Identifiers Characters
E-3
105507 105517
905600 905700
While using the MultiCode Method, scan
this bar code followed by the 3 code byte
bar codes in Section M that re p resent a
unique ID character to be associated with
this bar code type. Please refer to
MultiCode Method on page iii.