Talking, Before you can talk, Remember that basic key sequence? use it now – Motorola T6320 User Manual
Page 23: Channel frequency in use, Ta lk in g, No p
Ta
lk
in
g
11
Talking
Before You Can Talk
Have you ever tried to talk to someone who’s on a “different wavelength?” It’s
not easy, is it? Well, you can’t talk with someone else on your two-way radio
unless you ARE BOTH on the same channel and using the same interference
eliminator code.
The channel is the radio frequency wave your radio uses to transmit. The
interference eliminator code filters out static, noise, and unwanted messages.
Refer to the Frequency and Code Charts beginning on page 35 for channel
and code choices.
Setting the Channel
Remember that basic key sequence? Use it now!
To set the channel, select the
TWO WAY
mode and the
SET CHAN
menu.
Setting the Code
To set the code, select the
TWO WAY
mode and the
SET CODE
menu.
Your radio can save a specific code for each channel. Set the channel and code and while
operating, press
y
and then scroll between selected channel and code settings.
Your radio displays
p
whenever the channel
frequency is in use. Keep scrolling until you get a
clear one.
Channel Frequency in Use
24
b
e f g h i
14
1
k
l
m
no
p