Philips SVB106AT - Manual (Page 30)

30 Timer Recording (cont’d)
4
Select the information you want to change using the
F.FWD button. Press the REWIND button to go back one
step. (There is an exception. Do not press the REWIND button
while the program number is flashing. If you do, you will cancel
the timer recording completely.)
5
While the information is flashing, enter the correct infor-
mation by pressing the PLAY button or the STOP button.
6
When all the information is correct, press the COUNTER
RESET/EXIT button to exit. Turn off the VCR before the
timer recording.
Correcting a Timer Recording
If you need to correct a timer recording after you have finished
setting the program, follow these steps. Make sure the VCR is on
and is in VCR position. (The VCR/TV light will appear. If it does
not, press the VCR/TV button once.)
2
Press the PLAY button or the STOP button to select the
timer recording you want to correct.
NOTE: If some empty program numbers exist, the lower program num-
ber appears on the screen when you press the REWIND button. In this
case, you can set up a new timer recording.
1 6
3
2
&
5
1
Press the MENU button. The details of your timer recordings
appear on the screen. If no timer recordings are set, MENU 1 or
the CLOCK SET menu will appear.
TIMER PROGRAMMING
DATE STA/END CH
B 1 05/04 07:30 PM 16
THU 08:30 PM SP
3 05/11 10:00 PM 125
W THU 10:54 PM SLP
5 05/22 11:00 PM 40
DAILY 11:30 PM SLP
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/04 THU
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
3
Press the F.FWD button.
4