Philips SVB106AT - Manual (Page 10)

10 Hookups With a Stereo TV
antenna or
cable to
ANT(enna)
IN Jack
Video Cable
Audio Cable
VIDEO (yellow) and
AUDIO (red and white)
OUT Jacks
Audio and Video
IN Jacks on TV
● Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect an audio cable to the red and white AUDIO
OUT Jacks on the back of the VCR. Then, connect the
other end of the audio cable to the AUDIO IN Jacks on
your TV. Match the colors on the cable to the colors of the
jacks.
4
Turn on your TV, making sure it is in Line Input mode. Please
refer to your TV owner’s manual for details.
1
2
3
• A stereo audio cable (not supplied)
is used here to deliver audio to the
TV’s left and right channels.
• The TV must be in Line Input mode.
Please refer to your TV owner’s
manual.
• If your TV has only one AUDIO IN
jack, connect only the white audio
cable to the white AUDIO OUT jack
on the VCR and to the white
AUDIO IN jack on the TV. Refer to
your TV owner’s manual for details
of connecting a VCR to the TV.
Helpful Hints