Moxa Technologies INTELLIO C218 - Manual (Page 27)

Software Installation
Intellio C218Turbo /PCI User's Manual 3-9
l Click [Add] to add one more board that is not yet configured in the system.
Up to four of
Intellio C218Turbo/PCI boards can be installed together as
long as the memory and IRQ resources are sufficient and available in a
system. Please see steps 6 to 8 in the previous section, “Installing Driver”,
for more details.
l Click [Remove] to remove the board currently selected from the configured
board list.
l Click [OK] to confirm the configuration changes you made.
l Click [Cancel] to leave the dialog with the configuration unchanged.
Adding/Removing Board
Following is the procedure to add/remove
Intellio C218Turbo/PCI boards after a first
time installation. Note that the presence of the board(s) is(are) required for
adding boards.
1. Power off the system.
2. Plug/unplug the boards in the system.
3. Power on the system.
4. Run the software configuration “MOXA Configuration Panel” to add/remove the
boards, detailed in the previous “Configuring the Board and Port” section.
Updating Driver
To update the driver for the
Intellio C218Turbo/PCI board, simply remove the driver,
as described in the next section, and then reinstall it as detailed in the “Installing
Driver” section.