MITSUBISHI ELECTRIC 148 Series - Manual (Page 63)

6. NetCommand IR Control 63
Setting Up NetCommand Control of an A/V Receiver, continued
Audio Switching Setup 2: Automatic A/V Receiver
Switching to a Surround Sound Device
Use this setup to send digital surround sound directly
from a device to an A/V receiver.
Under
1. Learn, highlight Input2.
In this example, the IR code for the A/V receiver’s
DVD Audio input will be “learned” as Input2.
Press
2. ENTER on the TV’s remote control.
TV audio + video
Incoming
Coaxial
Cable
A/V Receiver
DVD audio
input
DVD Player with
Digital Surround Sound
video
video
digital surround sound
digital surround sound
vi
d
eo
an
al
og
a
ud
io
DVD Player
with
Digital
Surround
Sound
Setup 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
Completed NetCommand setup described for
controlling A/V receiver switching to an A/V receiver
input “learned” as
Input2.
While the text 3. Input2 is flashing, press and hold the
DVD INPUT key on the A/V receiver’s remote control.
When a check appears next to
4. Input2, release the
DVD INPUT key.
If the text stops flashing before the check mark •
appears, repeat this step.
To erase the IR code just “learned,” press
• CANCEL
while the name is highlighted.
Press 5. once to automatically move the highlight to
the Assign Input2 column.
Use
6.
to highlight DVD in the list of devices
recognized by the TV. The triangular marker always
shows the assigned sound source.
Press
7. EXIT if finished or continue for additional TV
sources.
A/V Receiver Control: Automatic Audio
and Video Switching via HDMI
If your A/V receiver has an HDMI output, you can use
this procedure to set up control of the A/V receiver’s
audio and video switching. The HDMI connection
allows you to route video signals from multiple devices
over a single cable to the TV. See the diagram on this
page. The connected devices can be analog, digital, or
a mixture or the two.
HDMI
4
3
2
1
IR-
Output / External Controller Input
S-VIDEO
VIDEO
AUDIO
L
R
INPUT3
INPUT2 INPUT1
L R
AVR AUDIO
OUTPUT
AUDIO
L
R
Pb
Y Y / VIDEO
Pr
ANT2/AUX ANT1/MAIN
DIGITAL AUDIO OUTPUT
NetCommand
) i 0
8 0
1 /
p 0 2 7 /
p
0 8 4 / i
0 8 4 (
AUDIO
R
DVI/PC
L
DIGITAL AUDIO OUTPUT
L R
AVR AUDIO
OUTPUT
DIGITAL
AUDIO
OUTPUT
L R
AVR AUDIO
OUTPUT
HDMI OUT
A/V receiver with
HDMI output
Audio from TV to A/V Receiver
High-definition
DVD player
DVD player
Cable box
VCR
TV main
panel
HDMI
cable
(Video to TV)
Optional
analog or
digital audio
connection
Multiple video inputs on a single HDMI cable. You can
connect multiple video devices to an A/V receiver that
has an HDMI output. The optional audio connection
allows you to hear, through the A/V receiver, devices
connected to the TV only.
More About Using an HDMI Connection with this
Setup
Audio from devices connected directly to the TV •
can be heard from the TV speakers only. This is
because audio signals are sent on the HDMI cable
in one direction only—from the A/V receiver to the
TV speakers.
To send audio to the A/V receiver from a device
connected directly to the TV, use one of the optional
audio connections shown in the diagram. For