Motorola F5207A User Manual
Page 19
19
Figure 2. Codeplug Editor
To modify configuration parameters use the MPS tool as the following:
•
Click on Read from CPU to read the codeplug parameters. If your device is
successfully read, you will see CPU parameters.
•
Click on Save to file to backup the original codeplug data.
•
Modify a parameter per your selection.
•
Click on Write to CPU to program the device.
•
If the device is successfully programmed, the following message appears.
CAUTION: Incorrect configuration can make the device inoperable. Please, make
sure to acquire the appropriate codeplug. Always make a backup copy in case an
error is made during the update.
Note: For details refer to Maintenance Programming Software User’s Manual.
This manual is related to the following products: