beautypg.com

MITSUBISHI ELECTRIC PSA012B722 User Manual

Page 5

background image

4

1

Press

TIMER button.

2

Press

button once.

Æ “

3

Press

SET button.

[EXAMPLE] “

” flashes,

” lights.

4

Press

or button.

The display changes as below. Set as you like.

⇔ “

” ~ “

⇔ “

5

Press

SET button.

Sleep timer has been set.
The air conditioner starts operating if it is stopped when the sleep
timer is set.
After “

” is displayed in the display area, it returns to

step

2

.

” (lights)

” (lit for two seconds)

È

” (lights)

” (lit)

The time left is displayed by one hour as time passes off after the
setting.
When the setting time elapses, the unit stops operating.
Every operation, the unit stops operation after the certain period
has elapsed.

6

Press

button.

The timer mode is finished.

3•5

2•4

1

6

1

Press

TIMER button.

2

Press

button twice.

[

]

Ж [

]

Ж [

]

3

Press

SET button.

[EXAMPLE] “

” flashes,

” lit.

4

Press

or button.

Set the time at which you want to stop the operation.

Set “Hour”
If you press

▲ or ▼ button for a while, “Hour” display is changed

by one hour, and stops when you stop pressing.

Set “Minute”
If you press

▲ or ▼ button, the display increases or decreases

by ten minutes.

5

Press

SET button.

OFF timer has been set.
After “

” is displayed in the display area, it returns

to step

2

.

” (lit)

” (lights for two seconds)

”(lit)

” (lit)

The unit stops operating at 6:00 PM.
The time display is also turned off.

6

Press

button.

The timer mode is finished.

The unit stops operating at the setting time.
This setting is effective for only once.

3•5

2•4

1

6

Once the OFF timer is set, it is not possible to
start operation. If you would like to operate the
air conditioner, press ON/OFF button before
hand to turn on.

SLEEP TIMER MODE

OFF TIMER MODE

• If you press

button while timer mode

is operative, timer mode is canceled and the
display will return to the original display.

If you do not press any button for several minutes

after entering the timer mode, the timer mode
ends and returns to the original display.

• If you press

button while timer mode

is operative, timer mode is canceled and the
display will return to the original display.

If you do not press any button for several minutes

after entering the timer mode, the timer mode
ends and returns to the original display.

ATTENTION

After certain period has elapsed, the unit stops operating.

• Sleep timer

The unit stops operating at each setting time once it is set.

NOTICE

HOW TO PERFORM THE TIMER OPERATION

< WIRED REMOTE CONTROL >

1

Press

TIMER button.

It enters the timer mode.
“Current day of the week” and “Current time” are displayed.

Display area :

[

]

[

]

[

]

2

Press

SET button.

The display area shows : [

]

(

▼ flashes)

[

] (current time)

[

]

3

Press

or button.

Align the

mark above the day of the week to the current

day of the week.

Press

▲ and ▼ mark to move to the right and the left respectively.

If you press the

RESET button, the remote control will return to

the previous screen and display “

”.

4

Press

SET button.

The day of the week is fixed, and the flashing of

▼ mark turns to

lighting stably.
“current time” is displayed by flashing in the ON timer display area,
and “

” is displayed in the display area.

5

Press

or button.

Set to the current time.

If you press the

RESET button, the remote control return to

step

1

.

6

Press

SET button.

The flashing for time display turns to lighting stably, and

” is displayed to show that the current time is set.

Two seconds later, it returns to step

1

, and “

” is

displayed.

7

Press

button.

The timer mode is finished.

2

3

1

4

5

6

7

Timer operation is performed based on the time of the clock which is set by the following steps. Make sure to
set the time to the current time correctly.

SETTING THE TIME

If you press

button while timer mode is operative,

timer mode is canceled and the display will return to the
original display. Note that the setting which has not been
completed is canceled.

If you do not press any button for several minutes after

entering the timer mode, the timer mode ends and returns
to the original display.

NOTICE

NOTICE