Macurco DVP-120 - Manual (Page 35)

Revision 0.07 35
3.3.8.12 Trouble Strobe Signal
T r o u b l e S i g n a l s
S t r o b e : 5 O F F
Figure 3-63 Strobe Trouble Signal
This display example shows that the strobe will not signal a trouble condition. The signal definitions are:
– 1 Continuous
– 2 Intermittent, one second on at two second intervals
– 3 Double Tap, two beeps at 5 second intervals
– 4 Triple Tap, three short beeps at 15 second intervals
– 5 Off, strobe will not flash (default)