Motorola SBV4200 - Manual (Page 13)

License
8 SURFboard ® SBV4200 VoIP Cable Modem User Guide X
Home Print Exit
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary
Installation and Configuration Overview
To install and configure your VoIP cable modem for a single PC running
Microsoft Windows, you can use the Installation Assistant.
Otherwise, to install and configure your VoIP cable modem:
1 Install the cables as described in one of:
■ “Cabling and Startup for a Single User” on page 9
■ “Cabling for Multiple Users” on page 39
2 If you are using the USB port only, go to “Setting Up a USB Driver” on page 11.
Ethernet users can skip this step.
3 Configure TCP/IP and verify the IP address for your computer following one of:
■ “Configuring TCP/IP” on page 22
■ Your Macintosh or UNIX user manual
To connect a single PC running Microsoft Windows
to a SURFboard VoIP cable modem, we
recommend using the Installation Assistant
application.
You can start the Installation Assistant from the
Main Menu on the SURFboard VoIP Cable Modem
CD-ROM. In most cases, the Installation Assistant
automatically configures your VoIP cable modem.