Motorola DCT3412 - Manual (Page 39)

Installation 3-23
Setting Description
Restore All
Defaults To reset all User Settings to their defaults, select this option and press the ► key.
For HDMI only, when you first connect a TV to the DCT* using the HDMI connection, the TV
and the DCT* exchange information to automatically determine the best possible TV TYPE
and HDMI/YPbPr OUTPUT settings. You can change these settings at any time:
ƒ To cause the HDMI TV and DCT* to re-exchange information to restore the automatic
settings, select Restore All Defaults with the HDMI connection in place and the TV
powered on.
ƒ If you connect another HDMI TV to the DCT*, select Restore All Defaults. This causes
the TV and DCT* to exchange information, enabling settings suited to your new TV.
3 To exit the menu and save your settings, press the
POWER or MENU key.
Graphics Overlaying the Video
The DCT3412 can generate graphics that overlay the video programming or fill the entire
television screen. Common examples include on-screen menus (such as the User Setting menu),
closed captions, and EPG. The DCT3412 overlays these graphics whenever the subscriber opens
a menu, enables closed captions, or scrolls through a program grid.
On-screen graphics are available for all DCT3412 video outputs except IEEE 1394.
DCT3412 Installation Manual